Vitek VTC-C960WS Manuál s instrukcemi

VITEKVTC-C960DSVTC-C960WS750 TVL 960H True Day/Night CCD Cameras w/Effio-A/V Processing• VTC-C960DS: 750 TVL 960H True Day/Night CCD Camera w/Effio-A

10• / : Selects previous page or next page.• EXIT : Enters ‘EXIT’ menu.• RETURN : Returns to the previous menu.OSD menu Startup OSD men

11OFFINT380120AUTO---3DAY/NIGHTON/OFFSET1/2/3480290MIDLEVELAUTOWDR for VTC-C960WS, ATR-EX for VTC-C960DSPICT ADJUSTEZOOMDISIR OPTIMIZERLENS SHD COMPDE

12PRIVACY MASKMOTION DETSYS SETTINGLANGUAGEVERSIONMAINTENANCEEXITTRANSPMOSAIC1110OFFAREA SELAREA MODETOPBOTTOMLEFTRIGHTTYPEMODEADJUSTSPEEDOFFONLENSCAM

13OSD menu Setup Press the OSD menu SET key down to access the setup menu mode. Sets the SHUTTER/AGC level to AUTO, MANUAL or FIX. These options have

14 Automatically tracks the changes of color temperature and continuously adjusts the white balance. The white balance range is 1,800°K~10,500°K. Note

151-3. HLC/BLC> INDOOR : Optimized for Indoor installation and more easily compensates ATW for low color temperature such as incandescent lights

16Sets enabling/disabling ATR compensation for the better dynamic range (D-WDR)of the image.ATR feature improves the dynamic range and the visibility

17AUTO mode in DAY/NIGHT is used only for a camera which does not have a lightsensor. Camera switches DAY from/to NIGHT automatically along with the a

181-6-2. DAY :1-6-3. NIGHT :• Verify ‘DAY/NIGHT’ after completing all settings of lens for zoom and focus.• If the gap between DAY->NIGHT and NIGHT

19• DAY/NIGHT : Follows the setting of DAY/NIGHT function.• OFF : Turns IR LED off.• FIX : Fixes the brightness of IR LED in any condition.IR OPTIMIZE

2CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PER

20LENS SHD COMPPATTERNPOSHPOSV290 RETURNSET1480 PICT ADJUSTBRIGHTNESSCONTRASTSHARPNESSHUECOLOR GAIN1283208064128RETURN1-8. LENS SHD COMP (default: OFF

21Increases or decreases the brightness of the picture. This is different from that of DC iris lens and simply increases or decreases the digitalgain

22Sets ON/OFF for enabling/disabling PRIVACY.Up to 15 privacy areas are available and each area is programmable in size andlocation. The number of pri

23MOTION DETECTIONDETECT SENSEINTERVALBLOCK DISPMASK AREAMONITOR AREA111000OFFRETURNRETURN6-4. MASK AREASets MASK AREA for disabling MOTION DETECTION.

24• TOP/BOTTOM: ◄button moves up and ►button moves down the top (bottom) border of the selected window at AREA SEL.• LEFT/RIGHT: ◄button moves left a

25Sets ON/OFF for enabling/disabling of ID display. Factory default ID is Softwareversion of camera. User programmed camera ID will be lost and restor

268. LANGUAGEThe camera firmware version is displayed.9. VERSIONSets the OSD menu user environments and Camera reset.10. MAINTENANCE● Use four directi

27This function is used to reset to the factory defaults of the camera settings.10-2. CAMERA RESET11-1. SAVE : Save all the setting before exit the se

28Image DeviceResolutionEffective PixelsMinimum IlluminationLens mount Day/NightWDRNoise ReductionMotion DetectionPrivacy MaskWhite BalanceAuto Iris C

29Image DeviceResolutionEffective PixelsMinimum IlluminationLens mount Day/NightWDRNoise ReductionMotion DetectionPrivacy MaskWhite BalanceAuto Iris C

3NOTICEThe image used in this instruction manual are processed to help comprehension and may differ from actual appearance of the camera.Avoid install

30VT-SRE SeriesSpire Series 4, 8, & 16 Channel 960H Digital Video RecordersOTHER PRODUCTS FROM VITEKSPIRE Elite Series 960H Digital Video Recorder

31VITEK LIMITED PRODUCT WARRANTYVITEK products carry a three (3) year limited warranty. Digital recording and storage products are also warranted for

28492 Constellation Road ValenCia, Ca 91355WWW.ViteKCCtV.CoM

4Safety Precautionp.03~04Contentsp.05Featuresp.06Compositionp.07Dimensionsp.07Part Namesp.08Installation Instructionsp.09~10Operating Instructionsp.11

5Key FeaturesGeneral Description• With ICR mechanism, - Enhances its sensitivity about 10x at night time - Can accepts the infrared light• With Effi

6DimensionsL- Wrench: 1.5mm (1pc)Dust Protection Cap (1pc)(unit : mm)Operating InstructionCamera1.73”2.09”1.89”Ø1.81”2.38”2.89”

7L-WrenchDustProtection CapNo.1234DC IrisDamp(-)Damp(+)Drive(+)GNDFlange Lock screwFront CaseRear CaseBack focusadjusting FlangeMount Holes(Top / Bott

81. Remove the dust protection cap from the lens mount.2. Screw the lens onto the camera firmly.3. Plug the lens plug into the lens connector on the r

9Using OSD ControllerSetup menu can be accessed and controlled by OSD control joy stick on the rearof the camera unit.Five commands are available with