Vitek VT-H41 Uživatelská příručka

BLACKYELLOWMAGENTACYANVITEKVT-H41 4 Channel Digital Video Recorder with H.264 Compression• 4 Video Inputs with 1 BNC & 1 VGA Outputs• H.264 Compre

VT-H41 9 7-2. Installing the network viewer ...

VT-H41 10 1. NAME & FUNCTION 1-1. Front panel  SEQ: To start auto sequencing of the screen in full screen mode. (Toggle) PTZ: To control PT

VT-H41 11 1-2. Remote controller  ID: When a remote control ID number is set in DVR, press it before number. REC: To start and stop manual re

VT-H41 12 1-3. Rear panel and connection 1-3-1. Basic connections

VT-H41 13 Table 1.2 Rear Panel Connections 1-3-2. Network connections 

VT-H41 14  Internet (ADSL) Connection Connect to the system, using a Router or ADSL modem and an Ethernet cable (10BASE-T/100BASE-TX CAT 5 LAN cab

VT-H41 15 ALARM OUTPUT: Use Maximum current: 0.5A/125VAC, Maximum voltage: 1A/30VDC. When controlling lamp and AC operated equipment, con

VT-H41 16 2-1-2. VGA: Select VGA to connect computer VGA monitor  2-2. Live screen While the s

VT-H41 17 Indicator Description C Continuous recording in progress R Manual recording in progress S Sensor alarm recording in progress M Motio

VT-H41 18 3. Go to DATE FORMAT field using button and select the date format using  button. 4. Go to DATE & TIME fi

VT-H41 1 SAFETY PRECAUTIONS EXPLANATION OF SYMBOLS WARNING To reduce the risk of fire or electric shock, do not expose this product

VT-H41 19 deleted.  Selecting “GO TO TEST MODE”: Selects only the video data between “SYSTEM TIME” and “HDD LAST TIME” and will not be deleted.

VT-H41 20 2. Select BEGIN field using button and press the SEL button. Then DAYLIGHT SAVING BEGIN screen is displayed. 3. Select the date and tim

VT-H41 21 3. OPERATION - RECORD The system has 6 recoding modes.  CONTINUOUS recording – Recording continuously when the DVR is turned on. C ico

VT-H41 22  Repeat this step to set the other channel as necessary.  Press ESC button to go to SAVE SETUP and save the . 3-2. MOTION DETECTION r

VT-H41 23  Select the grids for motion detection using button and SEL button. Then the selected grids are displayed in Pink color. 

VT-H41 24  Go to POST RECORD using button and select the time as necessary using button.  Repeat this step to set the other channel as nec

VT-H41 25  Go to RECORDING BY field using button and select SENSOR using button.  Go to DEVICE>CHANNEL>SENSOR RECORDING using butto

VT-H41 26  Go to ALARM/BEEP DURATION using button and select alarm/beep duration as necessary using Enter button.  Press ESC button to go

VT-H41 27  MOTION ZONE  MOTION SENSITIVITY  SENSOR TYPE  PRE RECORD  POST EVENT RECORD  Go to RECORDING BY field using button and select

VT-H41 28 : MOTION DETECTION recording mode setting applies to the whole day. : SENSOR recording mode setting applies to a specified time of eve

VT-H41 2  Do not place a container holding water or other liquids above the unit when it is connected to power.  Do not allow the unit to get

VT-H41 29 press SEL button. Then the CH1 SCHEDULE recording setting is copied to CH2. 4. OPERATION - PLAYBACK The system has 7 methods of searchi

VT-H41 30  Go to EVENT SEARCH and press SEL button. Then SEARCH screen is displayed.  Select the date, a channel, and the type of recording mod

VT-H41 31 4-2. TIMELINE SEARCH  Press SEARCH button. Then SEARCH menu is displayed.  Go to TIMELINE SEARCH and press SEL button. Then SEARCH cal

VT-H41 32 4-3. GO TO SPECIFIC TIME  Press SEARCH button. Then SEARCH menu is displayed.  Go to GO TO SPECIFIC TIME and press SEL button. Then

VT-H41 33 4-6. SYSTEM LOG  Press SEARCH button. Then SEARCH menu is displayed.  Go to SYSTEM LOG and press SEL button. Then SYSTEM LOG calendar

VT-H41 34  Select the date using  buttons and press SEL button. Then ARCHIVE LIST screen is displayed. Select one of the archived data lis

VT-H41 35  Archiving and backup JPEG in Live mode – JPEG image can be archived on HDD and be backed up to USB flash drive in live mode. (Refer

VT-H41 36  Then SAVING screen with backup status bar is displayed after “CHECKING USB” message. After the backup is done, “BACKUP IS COMPLET

VT-H41 37  Press CAPTURE button at the scene of video to be backed up. Then SELECT BACKUP FILE TYPE screen is displayed. Select a file type fro

VT-H41 38   After the backup is done, “BACKUP IS COMPLETED” message is displayed.5-3. Backup JPEG, AVI, or EXCLUSIVE VIDEO from ARCHIVE searc

VT-H41 3 Main features  H.264 Video compression  QUADPLEX operation enabling simultaneous recording, playback, networking,

VT-H41 39   Select VIDEO clip from the list using buttons and SEL button. Then a paused image or the first scene of the video is displayed

VT-H41 40  After the backup is done, “BACKUP IS COMPLETED” message is displayed.                       5-4. Playback of

VT-H41 41   6. SETUP Press the SETUP button, then the password window is displayed. The default password is 1111, which can

VT-H41 42 mode. SEQ-DWELL TIME Dwell time for each cannel display in sequential display mode. OSD CONTRAST Set the visibility level of the On Scre

VT-H41 43 ON: The channel is included in sequencing channels. OFF: The channel is NOT included in sequence list. BRIGHTNESS – Set the brightness o

VT-H41 44 RESOLUTION – Select the resolution for the recording using  buttons. 352x240: The input video is recorded as 352x240 resolution. 704x240

VT-H41 45 6-3. DEVICE Item Description CHANNEL Select the channel for applying the following settings. MOTION ZONE Select Full Zone or Partial

VT-H41 46 ALARM - Select an event to link with alarm using  buttons. OFF: An event signal is NOT linked with the external alarm. SENSOR: A sensor

VT-H41 47 FOCUS RIGHT button for FOCUS near or far of the selected camera. INITIALIZE Initialize the PTZ settings of the selected camera. REMOTE

VT-H41 48  Input a port number using  buttons and press SEL button. WEB PORT - Input a web port number using buttons. CLIENT AC

VT-H41 4 System components and Installation Requirements for installation and safety This chapter is for the requirements for safe

VT-H41 49  Input the registered PASSWORD that is necessary for ADSL connection using  buttons and press SEL button.  Press ESC button. Then

VT-H41 50 Setting of DDNS – Select ON/OFF using  buttons. ON: The network access by the pre-registered domain name address that is pre-regi

VT-H41 51 6-5. STORAGE Item Description OVERWRITE Enable/Disable Overwrite existing old video data when hard disk drive is full HDD FORMAT Fo

VT-H41 52 6-6. SYSTEM DESCRIPTION Press SEL to see system information. DATE FORMAT Select the preferred date and time display. SET DATE & TI

VT-H41 53 NETWORK PASSWORD – Select NETWORK PASSWORD using buttons and press SEL button. Then the NETWORK PASSWORD screen is displayed. Changi

VT-H41 54 menu setting value starts automatically..  After uploading is completed, then the DVR reboots automatically. USB UPGRADE  Download

VT-H41 55 7. Network access using the Exclusive network viewer The DVR provides a live remote monitoring feature. Remote monitoring requires insta

VT-H41 56 6. After the installation is completed, “UMS Client” icon is displayed on the desktop. 7-3. Live monitoring mode and functions. B

VT-H41 57 SEARCH Switches the live mode to search mode. DISPLAY MODE Select a channel and screen display mode. PAN/TILT/ZOOM/ FOCUS Control t

VT-H41 58  Full screen display - Click the maximize button to display only video and hide the operation panel.

VT-H41 5 Components The package contains the main unit and its components as specified below. When you purchase the package, please check to ensur

VT-H41 59 7-5. Remote search mode and functions Button Function Description DATE & TIME Displays the recording time of the data selected on

VT-H41 60 SEARCH CALENDAR The calendar shows dates with recorded video in light blue and the selected date in dark blue. TIMELINE BAR The timeli

VT-H41 61 Backup of video on the remote DVR Video recorded on the remote DVR can be backed up on the PC HDD as AVI format. 1.

VT-H41 62 7-6. PC System configuration Click the SETUP button. Then the Setup dialog is displayed. Setting General Set security options,

VT-H41 63  Display network statistics: If a user selects this function, the client S/W will display network status, Bit rate and Frame rate. 

VT-H41 64 Setting Record Set the recording conditions and select channels to record. Select the local disk to use and the amount of

VT-H41 65 Setting Video Set the video screen. Setting Language Select the language of the network client viewer.

VT-H41 66 8. Network – By a web-browser viewer The DVR provides a live remote monitoring feature by web-browser viewer. 1. Check the IP address of

VT-H41 67 www.vitekddns1.com), Port number and Password and click “Connect”  Server address: Input IP address of the DVR from SETUP>SYS

VT-H41 68 APPENDIX: How to connect to a network A. How to set the IP address of the DVR and open the TCP port of the router? The port forwarding is

VT-H41 6 SPECIFICATIONS ITEM VT-H41 (4CH) VT-H81 (8CH) VT-H161 (16CH) Video Input Channel, Input Level 4CH, Composite 8CH, Composite 16CH, C

VT-H41 69 5. Open your web browser. Enter the router IP address in the address bar (The router IP address are different with the brand and model.

VT-H41 70 B. How to access DVR from Remote PC?  LAN Connection – Using a switching hub Connect to the system, using a hub (Switching hub) and an

VT-H41 71 Connect to the system, using an Router or ADSL modem and an Ethernet cable (10BASE-T/100BASE-TX CAT 5 LAN cable) 1. Go to SE

VT-H41 72  Site Name: Input the name of the DVR.  IP Address: Input the Domain Name that is registered on http://www.vitekddns1.com (EX. XX

VT-H41 73

VT-H41 74

28492 CONSTELLATION ROAD VALENCIA, CA 91355WWW.VITEKCCTV.COM | 888-VITEK-70VITEK

VT-H41 7 Termination Yes Network Dynamic DNS Yes (Free DDNS) Network Interface 10/100 base-TX Ethernet (RJ-45) Network Access Client Softw

VT-H41 8 INDEX 1. NAME & FUNCTION......................... 10 1-1. Fr